We only use essential cookies on our website.
data protection - Cookies - imprint

Telephone availability: Mon - Thu 8 a.m. - 5 p.m., Fri 8 a.m. - 3 p.m.
de_DE_formal
de_DE_formal

TA Actuator 130 Ex

Torque up to 280 Nm. Ex II 2G Ex de IIC T6: Can be used with gases and vapors with high penetration capacity and low ignition temperature in the environment, e.g. hydrogen or town gas.

Details brochure

Ex II 2G Ex db eb IIC T6 GbTA Actuator 130 Ex

We advise you

If you have a question about this or other products, just give us a call or send us a message using our contact form.

Question about this product?

Product description

Value for money for medium and heavy industrial applications. Ideal, for example, for valves that require high torque over the entire travel range, such as chick valves on bitumen ships.
All options that TA-Roloff offers for user-specific design of drives can be implemented with this model.

Advantages

  • Can be used in Zone 1 and Zone 2
  • Certified: Ex II 2G Ex db eb IIC T6 Gb
  • Device categories 2G and 3G
  • Flameproof encapsulation “db” and increased safety “eb”
  • Can be used with gases with the highest ignition penetration capability “C”
  • Highest temperature class T6
  • For gases from ignition temperature > 85° C

Downloads

Technical data 1

Data sheet TA 130 / Swivel 90° / Quarter turn / Shut off
Type TA 130 Ex TA130/2 Ex TA 130 Z1 Ex TA 130 Z2 Ex TA 130 Z3 Ex
Torques 150 Nm 280 Nm 150 Nm 220Nm 280 Nm
Running time 90° (approx.) 12 sec. 20 sec. 50 sec. 100 sec. 190 sec.
General drive data
Duty cycle     100 % ED S 4 (Class C) serial (not TA 130/2= 15 min S2)    
engine     24VDC    
Rated current     2.5A    
rated capacity     75W    
Height     320mm    
Width     210mm    
depth     280mm    

Technical data 2

Data sheet TA 130 / Multiturn / Linear application / Control mode
Multiturn     Linear operation    
Type TA 130 Ex TA 130/2 Ex Type TA 130 Ex 130/2 Ex
Torque (Nm) 150 Nm 280 Nm Thrust force 2000 N 4000 N
Running time 360° 50 sec. 80 sec. max. thrust length 140mm 140mm
Possible 360° turns 1-100 1-100 Running time (approx.) for max. thrust length 25 sec. 50 sec.
Weight 14 kg 14.5 kg Weight 18 kg 18.5 kg
General drive data
Duty cycle Class C     100 % ED S 4 (Class C) serial (not TA 130/2)    
engine     24VDC    
Rated current     2.5A    
rated capacity     75W    
Height     320mm    
Width     210mm    
depth     280mm  

Options

parameter default Options Service / custom-made products
Operating mode Open/close 90° adjustment angle
  • Multi-way operation E 40
  • Multiturn operation
  • Linear operation
  • Consulting rule applications
  • Step control E18 or follow-up control E21
  • Data bus solutions
Flange connection Bolt circle according to DIN ISO 5211 Structural parts according to the requirements of the valve Mechanical connection in the factory (adaptation)
Supply voltages 24VDC
  • 230V AC/50Hz
  • other AC/DC voltage
 Consulting electrical implementation
Cable entry 3 x M 25 x 1.5   Electrical connection on site
Position feedback Cam switch
  • Potentiometers
  • Transmitter 0-(4)-20 mA
  • Consulting signal processing
  • SMS control and feedback
Duty cycle
  • 100 % ED S4 (Class C)
  • for TA 140 otherwise 15 min S2
 Permanently modulating (Class D)
  • Engine modifications
  • Brushless motors
Metal case aluminum stainless steel
  • RAL paints
  • Coatings
  • Anodization
Protection class
  • Explosion protection
  • Ex II 2G Ex db eb IIC T6 Gb
  • IP65
 Modifications up to IP68 user-specific housings
Manual emergency operation   Separating clutch with hand lever  
Failsafe facilities  
  • Auxiliary voltage E71
  • Spring closure FM system
  • Mechanical connection in the factory (adaptation)
  • Electrical connection on site

Downloads

In this download area you will find further details about the specifications of this product. If you have any questions about the product variants, options or customization options, “>contact Just tell us.

Back To Top