We only use essential cookies on our website.
data protection - Cookies - imprint

Telephone availability: Mon - Thu 8 a.m. - 5 p.m., Fri 8 a.m. - 3 p.m.
de_DE_formal
de_DE_formal

TA Actuator 60

Ideal for system installation (fire extinguishing system) or for automating high-pressure needle valves. Approved for rail vehicles. Also popular in laboratories for automating valves with small nominal diameters.

Details brochure

Up to 8 NmTA Actuator 60

We advise you

If you have a question about this or other products, just give us a call or send us a message using our contact form.

Question about this product?

Product description

Ideal drive for installation in systems (e.g. fire extinguishing systems) or for automating high-pressure needle valves.
Particularly suitable for mounting on laboratory fittings in the medical and pharmaceutical sectors.

Advantages

  • High torque (up to 8 Nm)
  • Compact size (ideal for system installation)
  • Simple electrical control
  • Robust metal housing
  • Lots of options

Downloads

Technical data 1

Data sheet TA 60/ Swivel 90° / Quarter turn / Shut off
Torque 8 Nm
Running time 90° approx. 2 seconds
Duty cycle 100 % ED S 4 (Class C) serial
Weight 1.5 kg
engine 24VDC
Rated current 1A
rated capacity 24W
Height 160mm
Width 94mm
depth 100mm

Technical data 2

Data sheet TA 60 / Multiturn

Characteristic Value
Torque (Nm) 8 Nm
Running time 360° approx. 7 seconds
Possible
360° turns		 8x360°
serial

Data sheet TA 60 linear operation

Characteristic Value
Thrust force upon request
Duration
for max. thrust length		 upon request

Control mode

General drive data Value
Duty cycle 100 % ED S 4 (Class C)
serial
Weight 1.5 kg
engine 24VDC
Rated current 1A
rated capacity 24W
Height 160mm
Width 94mm
depth 100mm

Options

parameter default Options Service / custom-made products
Operating mode Open/close 90° adjustment angle
  • Multi-way operation E 40 for 3-4 way fittings
  • N x 360° adjustment angle for spindle valves
  • Multiturn operation
  • Linear operation
  • Step control E18
  • Follow-up control E21
  • Data bus solutions
Flange connection Bolt circle according to DIN ISO 5211 Structural parts according to the requirements of the valve Mechanical connection in the factory
(adaptation)
supply
tensions		 24VDC
  • 230V AC/50Hz
  • other AC/DC voltage
 Consulting electrical
implementation
Cable entry

Compression fitting M 20 x 1.5

 Plug connection Electrical connection on site
position
return message		 Cam switch Potentiometers
  • Consulting signal processing
  • SMS control and feedback
Duty cycle

100 % ED S4 (Class C)

 Permanently modulating (Class D)

Engine modifications
Metal case
  • aluminum
  • TA blue finish
 Plastic coating
  • RAL paints
  • Coatings
  • Anodization
Protection class IP65 Housing modifications up to IP 68
(pressure encapsulation)
  • Consulting
  • user-specific housings
Manual
Emergency operation		   Separating clutch with hand lever  
Failsafe
Facilities		   Auxiliary voltage E71  

Downloads

In this download area you will find further details about the specifications of this product. If you have any questions about the product variants, options or customization options,

Back To Top